If you have found yourself needing new keyless entry remotes for your Ford truck, you may be wondering how to reprogram them. It may surprise you to know that it is quite easy, and you can do it yourself. Here is the step by step guide to reprograming keyless entry remotes:
1. Put a key in the ignition, and starting from the “off” or 3 position, turn the car to the “on”, or 4 position. You will do this eight times in a row, quickly.
2. If you have done this correctly, the doors will lock/unlock, letting you know that the car is now in programming mode.
3. Immediately (you only have 20 seconds) program your transmitter by pressing any button on the transmitter. At this point the doors will once again lock/unlock, letting you know that the transmitter has been programmed. If you have taken longer than 20 seconds to do this, then you will have to start over again.
4. You can repeat this step to reprogram any additional remote transmitters. When you have finished, turn the ignition off, or wait for 20 seconds. The doors will lock or unlock again to let you know that programming has finished.
There you have it. Reprogramming your keyless entry remote is quite simple to do.